Industry Solutions

Robot

High cost performance, widely used across many fields.

Electric moped

New energy vehicles

Medical devices

Semiconductor equipment

Automation equipment

Robot

Chemical machinery

Urban construction

Industry Solutions

Robot — What We Produce

High cost performance, widely used across many fields.

Robot joint housings carry alternating loads, so porosity and wall thickness are the two things we control hardest. Castings for this sector are X-rayed and sectioned at the sampling stage, then checked by batch.

Bearing bores and mounting faces are finish-machined on 4- and 5-axis centers to the tolerance stack your reducer supplier specifies.

Typical parts

Part	Recommended alloy	Industry
Joint housings	A356-T6 / ADC12	Robot
Reducer shells	A356-T6 / ADC12	Robot
Robot bases	A356-T6 / ADC12	Robot
End-effector parts	A356-T6 / ADC12	Robot

Quality documents for this sector

Material certificate for A356-T6 with heat-treatment record
CMM report on bearing bores and joint mounting faces
Wall-thickness and X-ray check on fatigue-critical joint housings
Surface finish (Ra) report on mating and sealing faces
Sample and mass-production dimensional report for each revision

Process route

RFQ & DFMWall thickness, draft, cores and tolerances reviewed; process recommended.
CastingGravity, low-pressure or sand selected per part geometry and volume.
Heat treatmentT6 where structural strength or pressure tightness is required.
CNC machining3-, 4- or 5-axis finishing to ±0.05 mm on critical features.
Surface treatmentShot blasting, anodizing, powder coating or painting to the sector's spec.
Inspection & packingCMM, X-ray and pressure test as required; export packing with documents.

Have a part for this industry?

Send the drawing or a sample photo — you will get a process recommendation, alloy advice and a written quote within 24 hours.

Get a Free Quote ← Back to all industries