Low-Pressure Casting Die
A low-pressure casting die designed for pressure-tight, thin-wall parts. Water cooling circuits are laid out during design so cycle time and thermal balance are controlled from the first trial.
Product Overview
A low-pressure casting die designed for pressure-tight, thin-wall parts. Water cooling circuits are laid out during design so cycle time and thermal balance are controlled from the first trial.
What Makes This Part Reliable
- Tool life 50,000+ shots with scheduled maintenance.
- Water-cooling circuit designed for even thermal balance.
- T1 in approximately 20 days from drawing release.
Typical Applications
Specifications
| Part Code | MOLD02 |
|---|---|
| Material / Alloy | H13 steel |
| Manufacturing Process | In-House Die Design & Manufacturing |
| Application Industry | Tooling |
| Typical Weight | 1 set |
| Dimensional Tolerance | ±0.05 mm |
| Surface Treatment | Heat treated · Nitrided |
| Dimensional Standard | Tool tolerance ±0.05 mm |
| MOQ | 1 set |
| Lead Time | 20–35 days depending on complexity |
| Inspection | CMM verification report, T1 sample approval |
| Part Category | Mold Manufacturing |
| Drawing Format | STEP / IGES / X_T / DWG / PDF — 2D & 3D both accepted |
Values shown are typical for this part family. Send your drawing and we will confirm the exact alloy, tolerance and price for your application.
Process Flow
- RFQ & DFMEngineers review your drawing, wall thickness, draft and tolerances, then recommend the process.
- QuotationWritten quote within 24 hours — tooling, unit price and lead time.
- ToolingIn-house mold or pattern, checked against a mold-flow simulation before cutting.
- T1 SampleFirst article shipped with a CMM report for your approval.
- Mass ProductionStable process parameters, in-line inspection and full lot traceability.
- Machining & SurfaceCNC finishing, then shot blasting or the treatment you specify.
- Final InspectionCMM, spectrometer, X-ray, hardness and metallographic analysis.
- Packaging & ShipmentExport carton or crate with desiccant; DDP available on request.
Need Low-Pressure Casting Die produced to your drawing?
Send a STEP file or a sketch and our engineers will reply with a process recommendation, realistic tolerance advice and a written quote within 24 hours.
More from the Same Process Family
Other parts we produce with the same process route — send us a drawing and we will quote in 24 hours.
